联系我们

保定巨盛模具制造有限公司

电话:13833064090

电话:15188633222

联系人:高经理

地址:保定市清苑区阎庄乡中阎庄工业区

新闻动态
地板U型槽与V型槽区别

The difference between U-groove and V-groove in floor
V型槽木地板可以避免拼缝处膨胀凸起,高低差等视觉效果,因而不用担心出现白边、起翘的现象。而U型槽比V型槽拼接的缝隙小,虽然有视觉上的边缘,由于是平面与槽口边缘的一体性,使用起来不会形成灰尘死角,对于日后的保养和清洁带来方便。关注:家居建材互动平台
V-grooved wood floor can avoid the expansion and bulge of the joints, the difference of height and other visual effects, so there is no need to worry about the phenomenon of white edge and warping. The gap between U-groove and V-groove is smaller than that of V-groove. Although there are visual luyashimoju.75ix.cn luyanshi.75ix.cn hupozhuann.75ix.cn mojulys.75ix.cn jinggaii.75ix.cn gougaibanmj.75ix.cn edges, due to the integration of plane and groove edge, it will not form dust dead angle when used, which will bring convenience for future maintenance and cleaning. Concern: Interactive Platform for Home Building Materials
此外V型槽口边缘的耐磨强度低于U型槽。因为传统的V型槽没有三氧化二铝的保护层,所以在耐磨强度上远低于U型槽的木地板。而且一般地板边缘磨损程度远高于地板表面,而U型槽地板边缘和表面都有三氧化二铝的保护层,因而更加坚固、耐磨。
In addition, the wear resistance of V-groove edge is lower than that of U-groove. Because the traditional V-groove has no protective layer of aluminium oxide, its wear resistance is much lower than that of the wood floor with U-groove. In general, the wear degree of floor edge is much higher than that of floor surface, while the edge and surface of U-groove floor have aluminium oxide protective layer, so it is more robust and wear-resistant.
最后,U型槽和V型槽地板制作的工艺不同。U型槽是模压工艺成型的地板,而V型槽是地板基材经过切割制成。两种各有优缺点,具体选择得根据自家的实际情况来定。
Finally, the manufacturing process of U-groove and V-groove floor is different. U-groove is the floor formed by moulding technology, while V-groove is the floor base material made by cutting. Both have their own advantages and disadvantages, and the specific choice depends on the actual situation of their own.

联系方式

  1. 保定巨盛模具制造有限公司
  2. 电话:13833064090
  3. 电话:15188633222
  4. 联系人:高经理
  5. 地址:保定市清苑区阎庄乡中阎庄工业区

版权 © 保定巨盛模具制造有限公司 网址:http://www.liushuicao.cn  推荐:流水槽模具,流水槽钢模具,排水槽模具,U型槽模具

网站建设及优化保定遨游网络公司